Blog

The 12-inch Parshall Flume is one of the most popular sizes of the Parshall Flume family. The flume is equally at home measuring sanitary wastewater at a municipal treatment plant as it is measuring water rights on The Western Slope. Applications The flume is regularly used to…

We often talk about how OCF tried to sweat the small things.  One of the items that we have focused on is our flow meter sensor mounting brackets.  Many of the designs currently on the market show, what we believe to be, a "good enough" philosophy - that the brackets…

The Palmer-Bowlus flume – quite possibly the second only behind the Parshall flume for measuring wastewater flows – suffers from a number of problems when it comes to its operational use. Some of the problems include:  proprietary design, high minimum flow rates,…

One question we get asked on a regular basis is:  can flow free fall off the end of a Parshall flume?  The answer is: yes – and if possible, this is the preferred method of discharge!  To understand why, we need think about how a Parshall flume operates:…

The H flume is a class of flumes developed by the Soil Conservation Service (USDA) to measure runoff from catchments and experimental plots.  Really more of combination between a flume and a weir, the H flume provides excellent low flow handling, solids passage, and a wide…

There are many, many different ways to install an H flume, some of them quite inventive!  Here we’ll go over the basics of installing an H flume in an earthen or concrete channel.   Keep in mind that these guidelines are just that:  guidelines.  …

Measuring flow in a flume should be a straightforward affair.  Unfortunately, we get more calls and inquiries on where / how to measure flow in a Palmer-Bowlus flume than all other flumes combined so we thought that we would go over it set the record straight. To better…

Openchannelflow offers a number of different flow conditioners to help to normalize the flow before it enters a Parshall flume.  Some of the conditioners are in-flume accessories, while others are installed upstream of the flume itself. Upstream For applications where the…

The freeboard is the difference in height between the top of a flume or weir and the highest water level anticipated. Freeboard is a guard against overtopping by waves, unexpected rises in the water level, or miscalculation in the maximum anticipated flows.  Freeboard is…

While not as varied as H flumes are in terms of their mounted, Parshall flumes can be installed in a number of creative ways to meet your flow measurement needs. The flumes are suscessfully used in:   Above grade At grade Below grade And manhole installations Versitle in…

In terms of installation and mounting, one of the most versatile flumes is the H series.   The flumes are suscessfully used in:   Above grade At grade Below grade And manhole installations This versatility in installation, combined with a wide range of styles and sizes,…

During periods of rapid water level change, the level in a stilling well may lag behind those in the channel that it is measuring.  This phenomenon is known as stilling well lag and is a result of head loss in the intake system. Stilling well lag may occur when the water…