Blog

One of the most common questions that we receive is how much straight channel is required upstream of a Parshall flume.  The answer is quite simple...

There are several components to measurement errors when using staff (level) gauges to determine flow depth in a flume or weir.  In general, staff gauge reading errors can be attributed to: Distance between the staff gauge and the observer The angle at which the gauge must be…

For those unused to measuring seepage from embankment dams knowing when to measure can sometimes be challenging.  In its Embankment Dam Instrumentation Manual, the Bureau of Reclamation lays out how frequently inspections should be made. Note that the table below indicates…

Seepage through, below, or around an embankment dam is a critical indicator of the health and condition of the dam.  The amount of seepage is normally directly related to the water level in the reservoir.  However, any sudden change in the amount of seepage without an…

As we have seen before, a Modified Parshall Flume (aka USGS Portable Parshall Flume) is a Parshall flume with the discharge section removed. Removing only the discharge section still allows for submergence calculations to be performed – unlike the true Montana flume where…

There is a common misconception of what does and does not constitute a Montana flume.  For some, a Montana flume is a Parshall flume with the discharge removed.  For others, it is a Parshall flume with the throat and discharge removed.