Blog

Many people confuse a flume’s resolution with its accuracy and use the terms interchangeably.  The two, however, are distinct from each other.  A flume may have good resolution, but poor accuracy, and vice versa.

For flume and weir applications where the flow entering the device may not be as well distributed as one would like / or where the velocity profile needs adjustment, perforated baffle plates can be a good choice. Used in a series of two or more, perforated baffle plates help…

Case Study Portable stream gauging Customer Warner College of Natural Resources - Colorado State University Background Warner College of Natural Resources (WCNR) at Colorado State University (CSU) is the largest named and most comprehensive natural resources program in the United…

Thin-plate weirs, when properly installed and maintained, are one of the most accurate means of measuring open channel flows.  Under field conditions, though, without proper sizing or regular maintenance a thin-plate weir will become increasingly less accurate over time.

A problem with the application of thin-plate weirs in the field is the lack of proper conditioning of the flow before it reaches the weir crest. Baffles, placed upstream of the point of measurement, can be used to correct both poor approach velocity profiles and surface…

Freestanding staff gauges are a good solution to the need to measure level in a flume, weir, or channel.  They are also useful in stream gauging or as replacements for other gauges that are damaged or no longer readable. Openchannelflow fiberglass freestanding staff gauges…

Reinforced weir boxes are a convenient way of measuring seepage flows out of a dam when the pipe is just below grade.  Reinforcing the sidewalls of a weir box can allow the structure to withstand the pressures exerted by the soil in shallow burial applications. In these…

Feedlots are an economical way to feed and raise a variety of livestock, but they generate large quantities of runoff, which can impact ground and surface water supplies.  Accurate flow measurement is important as part of a BMP approach to the problem and both flumes and…

A common problem we encounter in talking to customers about using weirs is lack of understanding of where the correct point of measurement is. Unlike a flume, where the point of measurement is integral or fixed in the structure, for a weir, the point of measurement is upstream of…

In selecting a material of construction for a flume or a weir, it is not uncommon for the decision to be made “go with stainless” without a consideration of the grade of stainless that best fits the application.  Both T-304 and T-316 stainless steels are…

Fiberglass packaged metering manholes are an innovative solution to the problem of needing to measure piped flow below grade. Packaged metering manholes factory integrate a flow element (usually a flume, but weirs and magnetic flow meters can also be integrated) directly into a…

Investigations by researchers have shown that in sharp-crested weirs even very slight rounding or dulling of the square upstream edge of the weir crest has a measureable effect on discharge. The effect of weir crest rounding on discharge is most evident on well rounded weirs with…